Follow us on:
facebook  Twitter  Exergen Blog
SmartIRt/c
Plug and play, linearized, precise accuracy, with integral design which eliminates thermal drift. No leakage current, impedance, or cold junction compensation to worry about.
smart

SmartIRt/c.3 and SmartIRt/c.5

(3:1 and 5:1 optics)

smart20

SmartIRt/c.20 and SmartIRt/c.40

(20:1 and 40:1 optics)

smartmicro

SmartmicroIRt/c

(remote sensor head with 1:2 and 4:1 optics, cooling jacket, and side view mount options)

 

WARNING: 4-20 mA models will only drive 50 ohm impedance, if your input device exceeds 50 ohms, you can either order a voltage output, or a model which will drive up to 250 ohms via special request. The 4-20mA models are also NOT LOOP powered, they are 4 wire, and a seperate power supply is required. Call 617.923.9900 option #4 or email: industrial@exergen.com if you have questions.

SmartIRt/c Assembly Drawing

SmartIRt/c.20 Assembly Drawing

SmartIRt/c.40 Assembly Drawing

smartSmartIRt/c Ten Compelling Reasons for Accuracy

 

SmartIRt/c Installation Instructions

SmartIRt/c Special 250 OHM Model Installation Instructions

 

SmartIRt/c Engineering notes

SmartIRt/c CE compliance report

SmartIRt/c-232 Technote

SmartIRt/c RS-232 SOFTWARE DOWNLOAD

1) Click here and OPEN ZIP file, save both EXE and SERPDRV to same folder (2400 Baud rate)

2) Run exergen.exe

3) Press RUN -->

4) Save file, choose name

5) Press STOP button to stop collecting data

6) Data will be saved in filename that you saved.

SmartIRt/c Product List

These models require power and have a linearized, analog output over a wide temperature range.

GENERAL SPECIFICATIONS

SIGNAL OUTPUT : 4-20mA, 0-5V, 0-10V, and RS232

POWER REQUIREMENTS: 12 VDC or 24 VDC

COLD JUNCTION COMPENSATION: Not required

EMISSIVITY: 0.9 for non-metal surfaces

REPEATABILITY: +/- 0.1 C to +/- 1 C (depending on temperature range)

RESPONSE TIME CONSTANT : 0.25 seconds approximately

RESOLUTION: 0.1% of full scale

SPECTRAL RESPONSE: 5.5 to 20 microns

OUTPUT CABLE: 3 ft (0.9 m) of 5 conductor, tinned copper, twisted pair, polypropylene, insulated with shielded wire

ORDERING INFORMATION

SmartIRt/c.F-P-O-T

F= Field of View (3:1=3, 5:1=5, 20:1: =20, 40:1 = 40)

P=Power (12VDC=12V, 24VDC=24V)

O=Output (4-20mA=420, 0-5V=05, 0-10V=010, RS232= 232)

T=Temperature range (70C=-30 to 70C, 100C=0 to 100C, 250C=0 to 250C, 500C=0 to 500C, 1000C=0-1000C)

Example: SmartIRt/c.3-24V-420-250C

150099
150094
150091
150092
150093
150102
150100
150101
150090
150098
150095
150096
150097
150106
150103
150104
150105
150013
150019
150014
150069
150071
150070
150072
150111
150108
150109
150110
150119
150116
150117
150118
150107
150115
150112
150113
150114
150123
150120
150121
150122
sm
150081
150078
150077
150074
150075
150076
150085
150082
150083
150084
150073
150089
150079
150080
150086
150087
150088
smartirt/c.20
150147
150145
150146
sm
150018
150017
150012
150139
150024
150025
150023
150001
150021
150022
150020
150141
150060
150061
150058
150059
150138
150140
150142
150144
150143
150161
150162
150160
150155
150156
150154
150167
150168
150166
150149
150150
150148
150164
150165
150163
150158
150159
150157
150152
150153
150151
Pricing Information
To obtain pricing information, please contact your local distributor, or call the factory at (617) 923-9900.  U.S. distributors | International distributors
Factory Experts are always at your service. Contact 617.923.9900, ext 6238 or 6263,or email: industrial@exergen.com, an expert will be in touch with you within 1 hour (during factory hours of 8AM - 5PM, US EST).
400 Pleasant St. Watertown, MA 02472
Toll Free : 1-800-422-3006
Phone : 617-923-9900 Fax : 617-923-9911